Single-phase isolation transformers are mainly used in AC 50/60Hz, voltage 1000V and below circuits, and can work continuously for a long time under rated load. It is usually used for electrical equipment that requires safe isolation.
Consultation hotline:
+86-13922794046
DG series isolation transformer in the power grid not only has the function of changing voltage, but also can isolate the power grid to the equipment harmonic interference, to protect the heat generated by the machine and insulation materials to reduce the life. (380V in → 220V out, 380V in → any voltage output, 220V in → any voltage output) specifications between 100VA ~ 500KVA, DG isolation transformer is widely used in AC 50/60HZ various power supply occasions. Various input and output voltages, coupling groups, adjusting tap positions, winding capacity distribution, secondary winding equipment, whether to require protective case shell, etc., can be designed and manufactured according to the user's requirements. Power 500VA-50KVA, voltage can be customized
Tel
18200881787
Wechat QRcode
Single-phase isolation transformers are mainly used in AC 50/60Hz, voltage 1000V and below circuits, and can work continuously for a long time under rated load. It is usually used for electrical equipment that requires safe isolation.
YK-DG single-phase isolation transformer | |
Phases | Single-phase |
Capacity | 100VA-500KVA (customizable) |
Input Voltage | 380V/220V/110V (can be customized) |
Output Voltage | Customize various voltages according to user requirements |
Output Voltage Accuracy | ±1% |
Voltage variation rate | ≤1.5% |
Operating Frequency | 50/60Hz |
Operating efficiency | ≥98% |
Insulation grade | F class, H class, HC class available (conventional H class) |
Impedance voltage | ≤4% |
Output waveform distortion degree | No distortion (compared with input waveform) |
Cooling method | Dry air-cooled |
Coupling method | Y/△ any benefit combination |
Overload capacity | 2 times the rated current to maintain 1 minute, allowing more than 1.2 times the rated load to work for 4 hours (can be fully loaded for a long time) |
Noise | ≤35dB (within one meter) |
Temperature rise | ≤60℃ |
Insulation resistance | ≥50MΩ |
Electrical strength | 2500VAC/1min |
Design life | 30 years |
Operating environment | Temperature: -20~+45℃ Humidity: ≤95%RH without condensation |
Safety standard | Products comply with VDE0550, IEC439, JB5555, GB226 and other international national standards |
Applicable altitude | ≤5000m |
Relative Humidity | ≤90% |
Workplace: The installation site should be free of gas, steam, chemical deposits, dirt, conductive dust and other explosive, flammable and corrosive substances that seriously affect the insulation strength of the transformer. |
Energy-saving and low noise
The use of high-quality cold-rolled silicon steel sheet stacked, special dipping paint process, effectively reduce the vibration and noise during operation; high-temperature insulation material design and other new processes, the introduction of new technologies, making the transformer more energy efficient, more quiet. The coil is equipped with ventilation slots for smooth air circulation and effective reduction of coil temperature.
Whats App